9 1/8" Deep Unassembled Frames - Wedge Top and Split Bottom with Pre-drilled Holes in Endbars - 100 Pack

QTY *Max order of 9

Recommended Add-ons

Product Details


  • High precision cuts and milling
  • Standard outside dimensions - works with all uncappers
  • Bottom bar is 33% thicker
  • Full ½" (1.27 cm) thick bottom bar
  • Less burr comb and fewer blowouts!
  • Unparalleled fit!
  • Use 9 5/8" Hive Bodies and 8 1/2" Foundation. Wedged Top Bars are best for pure beeswax foundation.
  • Nails not included. 


  • 8.60 x 19.30 x 22.20 inches
  • 42.70 LBS


  • 5

    Exactly right

    by Kirby English on Mar 04, 2024

    Good. No problems…

  • 5

    Quality manufacturing.

    by Robert Candido on Apr 06, 2022

    These are very well manufactured. There are hardly any splits, wood warping, or wrong cuts in the making of the materias. Premium wood was used. I like that the bottom bar ends are solid because the slot runs up to a bout 3/4 of an inch from the end. This leaves plenty of material for nailing the bottom bar to the sides of the frame. Other products with grooves run the groove from end to end. Of 100 frames, I received only one defective/broken bottom bar, but it was fixable and usable.

  • 5

    Solid frames that hold up well to assumbly.

    by Ron on Mar 10, 2022

    My go to frames.